Used D&B audioteknik T10 Line array/Point Source Loudspeaker in good condition.

System data
Frequency response (-5 dB standard)68 Hz - 18 kHz
Frequency response (-5 dB CUT mode)120 Hz - 18 kHz
Max. sound pressure1
with D6/10D
with D20/30D
with D80
129 dB2 / 127 dB3
132 dB2 / 130 dB3
132 dB2 / 130 dB3
Cabinets per amplifier channel4
Loudspeaker data
Configuration2-way loudspeaker with rotatable horn for point and line source operation
Nominal impedance16 Ω
Power handling capacity (RMS/peak 10 ms)200 /800 W
Nominal dispersion angle (point source, h x v)90° x 35°
Nominal dispersion angle (line source, horizontal)105°
Components2 x 6.5" driver with neodymium magnet
1.4" exit compression driver on rotatable waveguide
passive crossover network
Connections2 x NLT4 F/M
optional 2 x EP5 or 2 x NL4
Dimensions / weight
Dimensions (H x W x D)197 x 470 x 300 mm
7.8 x 18.5 x 11.8"
Weight11 kg
24 lb
Product description
The T10 is a passive 2-way loudspeaker housing two 6.5" drivers positioned in a dipolar arrangement and a 1.4" HF compression driver and a passive crossover network. The T10 can be used both as a line array and as a high directivity point source loudspeaker. The HF driver is fitted to a unique waveguide horn producing vertical line source directivity with a 90° horizontal pattern that is maintained down to approximately 600 Hz. An acoustic lens placed in front of the horn widens horizontal dispersion to 105°, rotation of the horn by 90° relative to this produces an accurate point source dispersion, transforming a vertically oriented T10 into a stand-alone full range loudspeaker with 90° horizontal and 35° vertical directivity pattern. The T10 cabinet is constructed from polyurethane integral hard foam, incorporates integrated line array rigging hardware and has an impact resistant finish. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.